NEK606 Offshore & Marine Cable

Cable Characteristics

Mud Resistant

The suitability of sheathing materials for use in areas in which the cables are exposed to drilling fluids is heavily dependent upon the type of fluid present. Each type of fluid contains additives which can have a deleterious effect on the sheathing material.
According to NEK 606, the mud resistant cables shall have a SHF Mud sheath that comply with the requirements in IEC 60092-359 for SHF2 and the below specified. The mud resistant cables shall be designed with sheathing compounds suitable for installation and operation in contact with MUD unless otherwise specified.

Oil Resistance

All thermoset sheathed cables shall be suitable for an oil production installation. The oil resistance properties shall be demonstrated by a test according to IEC 60092-359 SHF2.

Flame Retardance

The cables shall withstand the test specified in IEC 60332-3-10, -22, -23, -24, -25. Single, earth and bonding wires shall withstand the test specified in IEC 60332-1 or IEC 60332-2.

Fire Resistance

Fire resistance cables shall be tested according to IEC 60331-11, -12, -21, -25 and -31.

shipboard cables

F1 QFCI

Applications

These steel armoured optical fibre cables are flame retardant, low smoke, halogen free and fire resistant, used for communication and emergency systems that need to be operational during fire.

Standards

IEC 60794	IEC 60811-2-1
IIEC 60331-25	IEC 60332-3-24
IEC 60332-3-22	IEC 60754-1,2
IEC 61034-1,2	NEK 606:2004

F1 QFCI

F1 QFCI

Construction

Fibre Element : Loose tube core design.
Central Strength Element : Steel wire or fibre reinforced plastic (FRP).
Bedding : Halogen free and flame retardant thermoplastic compound.
Armour : Galvanized steel wire braid.
Outer Sheath : Halogen free and flame retardant, UV-stabilized, thermoplastic compound, SHF1.

Optional :

F4 QFCI-HCF : QFCI-HCF cables are consist of loose tube fibre element, steel wire or FRP central strength element, halogen free and flame retardant thermoplastic bedding, galvanized steel wire braid armour, SHF1 sheath, HC-fire protection, fire resistant tape and SHF1 outer sheath.

Electrical Characteristics

Fibre Type		9/125	50/125	50/125	62.5/125
ITU-T type		G652.D	G651	G651	-
IEC11801 Classification		OS1 & OS2	OM2	OM3	OM1
Core Diameter	μm	8.7±0.4	50±3.0	50±3.0	62.5±3.0
Cladding Diameter	μm	125 ±1.0	125 ±2.0	125 ±2.0	125 ±2.0
Coating Diameter	μm	245 ±10	245 ±10	245 ±10	245 ±10
Maximum Attenuation
@850 nm	dB/km	-	3.0	3.0	3.5
@1300 nm	dB/km	-	1.5	1.0	1.5
@1310 nm	dB/km	0.36	-	-	-
@1550 nm	dB/km	0.22	-	-	-
Minimum Bandwidth(OFL*)
@850 nm	MHz.km	-	500	1500	200
@1300 nm	MHz.km	-	500	500	600
Maximum Chromatic Dispersion
1285-1330 nm	ps/nm⋅km	2.8	-	-	-
1550 nm	ps/nm⋅km	18	-	-	-
Zero Dis ersion Wavelen th	nm	1300~1324	-	-	-

Mechanical and Thermal Properties

Bending Radius : 20×OD (during installation); 10×OD (fixed installed).
Temperature Range : -40℃ ~ +70℃.

Dimensions and Weight

No. of Fibres	Construction No. of tubes×No. of fibres in each tube	Number of Fillers	Nominal Loose Tube Diameter mm	Nominal Overall Diameter mm	Nominal Weight kg/km
2	1×2	5	2.2	13.9	244
4	1×4	5	2.2	13.9	244
6	3×2	3	2.2	13.9	244
8	2×4	4	2.2	13.9	244
10	5×2	1	2.2	13.9	244
12	3×4	3	2.2	13.9	244
16	4×4	2	2.2	13.9	244
20	5×4	1	2.2	13.9	244
24	6×4	0	2.2	13.9	244
32	4×8	2	2.2	13.9	244
40	5×8	1	2.2	13.9	244
48	6×8	0	2.2	13.9	244